15 mm x 35 mm x 11 mm NTN 7202UCG/GNP42 angular contact ball bearings

Weight:0.59 kg; Designation of housing:PAE205N-; d1:37.4 mm; Designation of bearing:ES205G2; G:R1/8"; H2:70 mm; Recommended tightening torque for set screw:5.5 Nm; d:25 mm; L1:21 mm; T min.:-20 °C;

N:15mm; J:157 mm; C0:23.2 kN; H:190 mm; B1:62.7 mm; d1:67.2 mm; Designation of housing:FA210-; L:115 mm; d:47.62 mm; G:M6x1;

RoHS:6; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Days to Ship:7 Days; Shape:Flanged Pilot Type; Seals:VV (Non-Contact Rubb; Bearing I.D. d(mm):8;

Category:Bearings; rs min:1 mm; d1:34.5 mm; da min:30 mm; Nlim (grease):11,000 rpm; Fatigue limit load, Cu:4.2 kN; Min operating temperature, Tmin:-40 °C; Inventory:0.0; Dynamic load, C:35 kN; Da max:47 mm;

Material Symbol:No; Accuracy(Class):No; Holder Symbol:M; Acoustic Symbol:No; Material Symbol:No; Bearing Ring Type:Type NU; Days to Ship:9 Days; Symbol of contact angle:No; Specifications:Standard; Basic Load Rating, Dynamic Rating(N):50500;

Shape:Flange Type; Flange O.D. H(φ):77; Number of Bearings:Double; Bearing Retained:No; Holder Surface Treatment:Black Oxide Coating; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Bearing Part Number:6905; Type:Bearings with Housin; Width T(mm):35 ～ 70;

Shape:T-Shaped; Number of Bearings:Double; Holder Surface Treatment:Electroless Nickel P; Thickness, Height Indication:T, h Configurable; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Bearing Material:[Steel] Steel; Days to Ship:8 Days; Housing Material:1045 Carbon Steel; Thickness T(mm):6

Designation of open end cover:SCO204-12; T max.:100 °C; L:127 mm; S:12.7 mm; C0:6.65 kN; H2:65 mm; L1:42 mm; N:13mm; C:12.8 kN; N1:19 mm;

T min.:-20 °C; H1:11 mm; A:40 mm; Z:64 mm; d1:32.4 mm; Designation of housing:PA204N-; S:17 mm; d:12 mm; Designation of closed end cover:SCCE204; N:M10;

Mass:0.78 kg; da min:68 mm; B:22 mm; Characteristic cage frequency, FTF:0.41 Hz; Radial clearance class:CM; Nlim (grease):3,800 rpm; Dynamic load, C:52.5 kN; Da max:102 mm; Characteristic rolling element frequency, BSF:5.26 Hz; f0:14.3;

N1:28 mm; Locknut:KM15; Seal Type:Taconite; L:345.00 mm; Material :Cast Iron; Adapter Sleeve1:H2315; H2:35.0 mm; Jmin:285 mm; UPC Code:999999999; Bolt Qty:2;

A3:4 mm; G:M10x1; T min.:-40 °C; S:33 mm; T max.:100 °C; C:104.26 kN; Designation of bearing:UC314-43G2T04; A5:45 mm; C0:68 kN; H:180 mm;

Seal, Shield Symbols:LLB; B:6; Retainer Type:Punching; Inner/Outer Ring Material:Steel; Bearing Style:Rubber Sealed; Max. Allowed rpm(rpm):34000; Size Standards:Metric System; Specifications/Environment:Standard; Days to Ship:Same day; Load Direction:Radial / Thrust;

Inventory:0.0; Max operating temperature, Tmax:120 °C; Fatigue limit load, Cu:19.8 kN; Nlim (oil):5,100 rpm; F:95.3 mm; Static load, C0:167 kN; Dynamic load, C:139 kN; dc min:104 mm; Min operating temperature, Tmin:-20 °C; da min:89 mm;

Unit Body Material:Cast Iron; Bearing Unit, Type:Round flange shape; Basic Load Rating, Static Rating(N):11300; Rolling Element Material:Bearing Steel; Surface Treatment:No; Unit, Type:Insert Bearing Unit; Grease Type:SH33M; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; Fit